Oregon Scientific ThermoDECT, Instruction

Page: 8 / 31

9
EN
Once you place a call, the display on the handset will begin timing the call length after approximately 15
seconds.
Correcting a dialling error
To correct a dialling error:
1. Press the button to clear the digits one by one, OR
2. Continuously press the button to clear all the digits at once.
Redialing a number
To redial one of the last 10 numbers that you called:
1. Press the button to view a list of the last 10 numbers you dialed.
2. (Optional) To scroll through the list of numbers, press or to scroll up or down.
3. Press the button to call the selected number.
Answering a telephone call
When you receive an incoming call, the handset will ring and flash External call on the display. If you
are already on the line, you will hear a beep to let you know that you have a call waiting. (For more
information about call waiting, refer to page 20 of this user manual.)
To answer a call:
1. Press , OR
2. Press the button to use the speakerphone.
Once you answer the call, the display on the handset will begin timing the call length after approxi-
mately 15 seconds.
Returning missed calls
If you subribe for caller ID sevice through your telephone carrier your ThermoDect telephone can keep
track of missed calls information for you. When you miss a call, the handset will display “New Calls”
and the number of calls you missed. To review the call history (including caller ID), press the button.
To dial the number, press the button.
Ending a telephone call
To end a telephone call, press .
Using the handset speakerphone
To use the handset speakerphone during a conversation, press the button. The battery life for
speakerphone mode is ~ 1 hour.
To turn off the speakerphone, press the button again.
Note: To adjust the speaker volume, press first and then or .
Muting the microphone
You can temporarily mute the microphone on your handset to prevent a caller from hearing a side
conversation. To activate or deactivate the mute feature:
1. Press to mute the microphone.