Oregon Scientific ThermoDECT, Instruction

Page: 22 / 31

23
EN
SETTING AND USING THE HANDSET CLOCK
You can change the following time and date settings for the clock display on your handset:
• Time – 12- or 24-hour clock display
• Date – DD/MM (Date/Month) or MM/DD (Month/Date) display
• Current date and time
If you have multiple handsets, you only need to set the time and date on one handset. The alarm can be
set for each handset separately.
Selecting 12- or 24-hour display
To change the handset hour display format:
1. Press the button.
2. Press to select Setup from the options.
3. Press .
4. Press again to select Clock Setting from the options.
5. Press to select Hour Format from the options.
6. Press .
7. Press to select 12 or 24 hours.
8. Press to confirm your selection.
Tip: To return to standby mode, press and hold the button.
Changing the date format
To change the handset date display format:
1. Press the button.
2. Press to select Setup from the options.
3. Press .
4. Press again to select Clock Setting from the options.
5. Press to select Date Format from the options.
6. Press .
7. Press or to select DD/MM (Date/Month) or MM/DD (Month/Date).
8. Press to confirm your selection.
Tip: To return to standby mode, press and hold the button.
Changing the date and time
To change the date and time on the system clock (e.g. all handsets):
1. Press the button.
2. Press to select Setup from the options.
3. Press .
4. Press again to select Clock Setting from the options.
5. Press again to select Time Setting.
6. Press the keypad digits (0-9) to input the date and month.
7. Press to confirm the date and month, and to enter the time setup mode.
8. Press the keypad digits (0 – 9) to input the hour and minute.
9. Press to confirm your selection.
Tip: To return to standby mode, press and hold the button.