Oregon Scientific SE836, User Manual

Page: 16 / 64

E
N
4
DEVICE SEARCH BEFORE EXERCISE
Before you start exercise, allow the watch a few seconds
to search for device first. This is to ensure you can receive
comprehensive calculations (such as your lap, calorie, heart
rate, distance, step, speed and cadence) during exercise.
But if you start exercise without device search, you will only
receive heart rate readings.
When you are in the screen below, you will find that the
device icons ( , , or ) are flashing and there are no
heart rate values. Wait until or stops flashing and
heart rate values appear. Then you can start exercise by
pressing SET .
AUTO TOGGLE DATA VIEW DURING EXERCISE
During exercise, if you want the watch to automatically toggle
the exercise data, go to Setting Mode to do the setting.
. Press MODE repeatedly to select .
2. Press ST/LAP/+ repeatedly to select “SET WATCH” .
3. Press SET .
4. Press ST/LAP/+ or -/SP repeatedly to select “SET
VIEW” .
5. Press SET .
6. Press ST/LAP/+ to select “TOGGLE ON” .
7. Press SET to confirm selection.
NOTE
If you have not set the above setting, you can
still view your exercise data by manually pressing SET
repeatedly during exercise.
PAUSE AND RESUME EXERCISE
If you need to take a break during exercise, press -/SP .
During the long pause, the watch will lost connection with
the device. Hence, once you resume exercise, allow the
watch a few seconds to search for device first by pressing
SET . You will find that the device icons ( , , or ) are
flashing and there are no heart rate values. Wait until or
stops flashing and heart rate values appear. Then you
can resume exercise by pressing ST/LAP/+.
During pause, if you want to exit exercise:
Press MODE . Your exercise data will be automatically
saved.
NOTE
•
In case the pause has exceeded its time out (5 minutes),
your watch will automatically save your exercise record
and return to Time mode.
•
During pause, if you want to exit exercise without saving
your exercise data, press and hold - / SP .