E
N
5
MANUALLY SET CLOCK
To set the clock manually, disable the clock signal reception
first.
1. Press and hold
MODE
.
2. Press
or
to change the settings. The settings
order is: time zone, 12/24 hr format, hour, minute, year,
calendar mode (month – day / day – month), month, day
and language.
3. Press
MODE
to confirm.
RMS300:
Time zone sets the clock +/- 23 hours from the
received clock signal time. If you have deactivated the clock
signal reception, do not set a value for time zone.
RMS300A:
Select the time zone: (P) Pacific, (E) Eastern,
(C) Central or (M) Mountain.
NOTE
The language options are English (E), German (D),
French (F), Italian (I), and Spanish (S).
To select clock display mode:
Press
MODE
to toggle between clock with seconds, clock
with weekday and calendar.
TEMPERATURE AND HUMIDITY
To toggle temperature unit:
Press
°C / °F
.
To auto-scan channels:
Press and hold
+ MEM
to display each channel’s
recorded data in sequence for 3 seconds.
To select channel, press
.
To toggle between current, minimum and maximum
temperature/ humidity record of a selected channel:
Press
MEM
.
To clear the temperature / humidity record displayed:
Press and hold
MEM
.
ICE ALERT (CHANNEL 1 ONLY)
If the temperature falls between 3°C to -2 °C (37°F to 28°F),
the green ice alert LED indicator will flash continuously, and
will stop flashing once the temperature is out of this range.
CONNECTION TO PC
Weather data of temperature and humidity readings can be
uploaded to the computer by connecting the main unit to
the computer.
To upload the weather data to the computer:
1. Install the PC software. It can be available for download
at this address:
http://10.1.6.110/rms300.exe
2. Follow instructions in the software programme.
3. Plug one end of the USB cable into the USB port and
the other end into the computer.
RMS300 IM EN R3.indd 5
1/4/08 11:52:36 AM