background image

7

GB

setting, press and hold  

 ] or 

 ] will increase or decrease the

value rapidly.
Note that the date is displayed in DAY-MONTH format.  For display
language, you can choose among English (E),German(D), French(F),
Italian (I) and Spanish (S).

If there is an item you do not wish to change, simply press
[ MODE ] to bypass the item.

When you are done, press [ MODE ] to exit. The display will return
to the clock mode.

HOW TO SET AND 

ACTIVATE

 THE ALARM

This unit is equipped with a Daily Crescendo Alarm. To set the alarm,

1. Press 

 ] once to display alarm time.  If the alarm is deactivated,

the time will be displayed as

 

[

 -:--

 ].

2. Press 

 ] for two seconds. The hour digits will blink.

3. Enter the hour using 

 ] or  

 ].

4. Press 

 ]. The minute digits will blink.

5. Enter the minutes using 

 ] or 

 ].

6. Press 

 ] to exit.

The 

 ]

 icon will be displayed on the screen during the setting

Alarm.

 The alarm 

 ] icon  will be displayed indicating the alarm

is now 

turned on

.  You can 

turn on or off the

 alarm by pressing the

 ] button repeatedly.  Press [ MODE/SET ] to return to clock

display mode.

When the alarm is turned on, it will be activated at the set time.

The ALARM ON icon 

 [   ]

 will flash and the alarm will be give off

sound.

CRESCENDO ALARM AND SNOOZE

FUNCTION

The crescendo alarm function allows alarm sound intensity increas-
ing gradually. The Alarm will be stop by pressing any button or
stop automatically for 2 minutes without interruption.

If SNOOZE button is pressed,

 

during the alarm sounded

 the alarm

sound will be turned off temporarily and the snooze function will
be activated.

 The ALARM ON icon 

 [   ] 

 will flashing and the alarm

will be activate again

 after approx.8 minutes until other key is

pressed to turn off the alarm.

HOW TO USE THE PROJECTOR

The projection feature projects the current time and outdoor
temperature on the ceiling, wall or other flat surface.

To project the time and outdoor temperature onto a flat surface:

In a darkened room, press [ 

 ], the projection

Monday     Tuesday      Wed.       Thursday    Friday      Saturday   Sunday

Day-of-the-week

Language

English

German

French

Italian

Spanish

Summary of Contents for RMR686P












Reviews: