background image

2

GB F MODE  button

Toggles the calendar clock display modes or activates the
calendar clock setting mode

G UP [ 

 ] button

Increases the value of a setting

H ZONE  button

Toggles among the 4 U.S. time-zones: Pacific, Mountain,
Central or Eastern

I

ALARM  button
Displays the alarm time or sets the alarm status

J

 ] button

Activates the snooze function when an alarm activates or
turn on the back light for five seconds

K Battery compartment

Accommodates two UM-4 or “AAA” size 1.5V batteries

L

RESET  button
Resets the unit by returning all settings to their default
values

M Rotatable  stand

BATTERY INSTALLATION

The unit uses two (2) UM-4 or “AAA” size 1.5V batteries.

To insert batteries:

1. Click open the battery door as shown.

2. Insert the batteries strictly according to the polarities shown

therein.

3. Replace the battery compartment door.

Note: The battery life can be reduced vastly by frequent use
of the back light or snooze function.

If not disposed of properly batteries can be harmful.
Protect the environment by taking exhausted batteries
to authorized disposal stations.

If the batteries are already inserted, pull out the plastic tab.

HOW TO USE THE BACKLIGHT

Press [ 

 ] once. The back light will activate

for five seconds.

ABOUT RADIO RECEPTION

This unit is a radio frequency (RF) controlled clock. When located
within a 1500km or 1000 miles radius of radio signal from the U.S.
Atomic Clock. The benefit of a RF controlled clock is that highly-
accurate time is maintained and manual adjustments to the time
and date are not required.

Summary of Contents for RM962A








Reviews: