3
GB
Note: Under normal circumstances, the batteries are good for 1
year. However, the battery life can be reduced vastly by frequent
use of the projector or snooze function.
If not disposed of properly batteries can be harmful.
Protect the environment by taking exhausted batteries
to authorized disposal stations.
HOW TO USE THE PROJECTOR
Press [
SNOOZE
] and the projection will be activated for
approximately 5 seconds.
Note: Make sure the [
PROJECTION ON
] switch is switched to the
front.
HOW TO USE THE PROJECTOR
WITH POWER ADAPTER
RM813P/RM813PU comes with an AC power adapter. Use of the
AC power adapter is required for continuous time projection.
To install the adapter:
1. Insert adapter into jack at the bottom of the unit.
2. Plug the adapter into an electrical wall outlet.
Note: Make sure the voltage is correct.
Once the power adapter is in place, you can select to turn on the
projector for longer time (such as throughout the night) by sliding
the [
PROJECTION ON
]
switch on the side of the unit to the back.
To turn off the projector, slide the switch back.
Note that this switch can only be used with the power
adapter installed. For momentary projection, use the
[
SNOOZE
].
ABOUT RADIO RECEPTION
RM813P/RM813PU is designed to synchronize its calendar clock
automatically once it is brought within range of the Frankfurt
DCF77 radio signal (MSF60 for UK version).
When RM813P/RM813PU is within range, the radio-controlled
mechanism will override all manual setting unless radio reception
is being deactivated.
When the unit is receiving signal, the Radio Reception symbol
[
] will start to blink. Generally, complete reception takes
around 2 to 10 minutes depending on the strength of the radio
signal.
To disable the reception of RF signal manually, press and hold the
[
] button for 2 seconds until the Radio Reception symbol
disappear.
To enable the reception again, press and hold the [
] button for
2 seconds. The Radio Reception symbol will blink and the unit
will search for RF signal automatically.
