9
GB
MANUALLY SETTING: TIME, YEAR, MONTH,
DATE & LANGUAGE
NOTE: It is highly unlikely you should ever have the desire (or need) to manually
set the clock time, year, month or date of the Radio Controlled Clock. However,
in the event this becomes necessary please review the following.
Setting the Time
1) Press and hold MODE button for at least three seconds. The “Hour” segment
of the time will begin flashing.
2) While the “Hour” segment is flashing press the [+] button to set the desired
hour time is reached hour time (Please note the AM/PM designation).
3) When the desired hour time is reached press the MODE button again. The
“Minutes” segment of the clock time begin flashing.
4) While the “Minuted” segment is flashing press the [+] button to set the de-
sired minutes time.
5) When the desired minutes time is reached, briefly press the MODE button five
more times to exit the clock time set mode.
IMPORTANT : As soon as any manual change in the clock time is mode, there is
a loss of the signal strength indicator from the display.
NOTE : The next successful reception of a radio signal will override all manual
settings.
Setting the Year Month and Date
1) Press and hold MODE button for at least three seconds. The “Hour” segment
of the clock time will begin flashing.
2) Briefly press the MODE button and the “Minutes” segment will begin flashing.
3) Briefly press the MODE button once more. The clock time will disappear and
be replaced by a flashing year (Ex. 1995). This is the year set mode.
4) While the “Year” segment is flashing press the [+] button to set the desired
year.
5) When the desired year is reached briefly press the MODE button and the
"Month" digit will start flashing.
6) Press [ + ] button until the desired month appears on the display.
