5
GB
Signal Strength Indicator – Figure A.7
Meaning
Your last signal reception was excellent and time Syn-
chronization with the US Atomic Clock has taken
place.
Your last signal reception was insufficient and it is
recommended that you reposition the clock.
The displayed time has been manually set and is not
synchronized by the RF signal.
Your radio reception is disabled and no signal
reception will be initiated unless it is enabled again.
Time Display (Figure A.8)
The top line of the display shows the hours, minutes and seconds (AM/PM) of the
clock. Pressing the MODE button once will switch the “Seconds” display to the
Day of the Week. The Radio controlled Clock will continue to display the selected
function (Day or Seconds) until the MODE button is pressed again.
US MAP (Figure A.9)
This map represents the four optional time-zone setting. The darkened of filled
zone block indicates the user selected time zone. NOTE: When the radio
controlled Clock is receiving a signal from the US Atomic Clock; outline of this
map will flash.
Month/Date (Figure A.10)
The Second line of the display shows the Month and the Date. Pressing the ((•))
ALARM button once will switch the “month and date” to show the “alarm time”.
The Alarm time is displayed in hours and minutes (AM/PM). NOTE: The Radio
controlled Clock will continue to display the selected function (Month/Date or
Indicators
on the Display
No Indicator
