EN
15
CLEAR MIN / MAX RECORDS
While viewing Min/Max records, press and hold
UP
or
DOWN
for 2 seconds until a beep sounds. This clears
the previous measurements from the memory.
SELECT REMOTE UNIT CHANNEL
While in the Temperature / Humidity Mode, press
CHANNEL
to switch between CH 1, 2, or 3, or press
and hold
CHANNEL
for 2 seconds to enter Auto scan
mode. If only 1 remote unit is in use, you will not be
able to change channels or Auto scan. If you select
"Auto", the channel will change every 3 seconds. To
deactivate, press and hold
CHANNEL
for 2 seconds
again.
TEMPERATURE AND HUMIDITY
With the press of a button, you can check the current
indoor or outdoor temperature, humidity percentage,
comfort level, trend, and record measurements.
Outdoor measurements are collected by the remote
unit.
Temperature is given at the top; humidity is below.
VIEW MIN / MAX / CURRENT MEASUREMENTS
Press
SELECT
3 times until the Temperature and
Humidity Areas flash. Press
UP
or
DOWN
to scan the
readings.
PS M03 English R18
7/16/03, 1:04 PM
15
