14
EN
AUTO-RELOAD
You can set the timer to automatically reload when you
reach a pre-set altitude. Therefore, when you get back to
the top of a run all you have to do is press
ST
to activate
the countdown timer.
To activate this function, you must turn it ON and set the
altitude reload height. The altitude reload height is relative
to the base-level height that you set in the auto-stop
feature.
AUTO-STOP
You can set the timer to automatically stop when you go
below a pre-set altitude. This means that when you are
timing a run you do not have to stop the timer manually.
To activate this function, turn it ON and set the base level
as shown in the “Set the Auto-Stop” section below.
SET THE SKI TIMER
To set the ski timer:
1. Press
MODE
to navigate to Ski Timer Mode. The last
countdown time will display on the screen.
Either:
2. Press
ST / SP
to start and stop the countdown timer.
Or:
3. Press and hold
SET
to enter a new countdown time.
4. Use
+
or
-
to change the setting.
5. Press
SET
to confirm.
SET THE AUTO-STOP
To set auto-stop:
1. Press
MODE
to navigate to Ski Timer Mode.
2. Press and hold
SET
. Then press
SET
until you reach
the screen below.
RA103&RA183_EN_023.p65
11/3/05, 12:33 PM
14
