ENEN
31
“My call was cut off when I went out of range of the base unit. Now
I cannot use my handset.”
• Please move the handset closer to the base unit.
“I hear a tone while I am using my handset, and the battery symbol
on the display is “empty.”
• The battery needs to be recharged. Put the handset into the
charger; it will take up to 15 hours to be fully charged.
“I’ve tried recharging the batteries, but I still get a warning that it is
not charged.”
• The batteries probably need to be replaced.
“The handset does not ring when a call comes in.”
• Check that you have not set the ringing volume to “
Off
” (see section
Setting the Ring Tone Volume
).
“The Caller Display function is not working.”
• Please check if you have subscribed to the Caller Display service
with your network provider.
“The Caller Display function is working but the Caller’s Name from
the phonebook is not displayed even if the same phone number
calls in.”
• You need to store the full phone number including the STD code
into your phonebook memory.
“I have tried several times to press the TALK key but I cannot make
a call.”
• Your phone may not be registered.
See section
Registering Handset
to Base Unit
.
“The Within Range Symbol is flashing on the handset display.”
• Due to radio interference in the environment, occasional loss of
synchronization between the handset and base unit may have
occurred for a very short period. The base unit will quickly change
to another channel automatically to overcome the interference and
restore the synchronization. You can also move the handset near the
base unit to reduce the interference.
