EN
28
You can transfer an external call from one handset to another.
1. During an external phone conversation, press
INT
. Your caller will be
put on hold.
2. Type in the handset number (1-
2
) to which you want the call transferred.
3. The paged handset will ring and
“INT CALL”
will appear on the
display.
4. To answer the call on the paged handset, press
TALK
.
5. Press
TALK
on the paging handset to transfer the call.
NOTE:
If the other handset does not answer, press
INT
to end the intercom
call and get back to the external line. Pressing
TALK
will end both the
intercom call and the external call.
The handset and base unit are factory pre-registered with each other.
Therefore, the unit should be in full working order out of the box.
When you purchase an additional handset, you have to register it to the
base unit in order to make and answer calls.
You can register up to
1
more handsets to make and answer calls via the
same base unit. Handsets are numbered 1 to
2
.
To register a new handset:
1. On the handset, press
MENU
.
2. Use the
ARROW KEYS
to select
“Handset Setting”
, then press
MENU
.
3. Select
“Registration”
, then press
MENU
.
4. Select
“Yes”
, then press
MENU
.
5. You will see the message:
“REGISTERING”
. Press and hold the
PAGE
key on the cradle of the base unit.
6. When the registration is complete
“OK”
will appear on the screen.
NOTE:
The base unit will then send a signal to the handset registering
the handset to the base unit. Once the Registration function has been
completed, the handset will return to Standby Mode.
CALL TRANSFER BETWEEN HANDSETS
REGISTERING HANDSETS TO BASE UNIT
