Oregon Scientific i.comfort IBM80002, User Manual

Page: 4 / 56

OPERATION
TURN MASSAGER ON
NOTE
START MASSAGE
NOTE
CUSTOMISE MASSAGE
4
1. Plug adapter into socket and connect to power cord.
‘OF’ on LCD Screen indicates massager is in standby mode.
Make sure the adapter is not obstructed and is easily "
accessible to the personal massager.
To completely disconnect from power, the adapter should be
"
disconnected from the power cord by pulling it out while holding
the plug. Do not disconnect with wet hands or yank cord out.
The personal massager and adapter should not be exposed
"
#$ %
should be placed on the personal massager and adapter.
1. Position affected body area to be treated against the i-comfort.
$ % "
seat.
2. Press < >. ‘15’ indicates massage has begun and
there are 15 minutes remaining.
1. Press < > / < > to select desired massage direction (‘C1’
indicates clockwise, ‘C2’ indicates anticlockwise).
2. Press < > / < > to select desired massage intensity (‘P1’
indicates normal, ‘P2’ indicates medium, ‘P3’ indicates strong).
EN