6
3. “
TIMER
” BUTTON:
1) By pressing this button, the purifier can be timed to operate for intervals of 2
hours, 4 hours and 8 hours, stopping automatically when the selected operating
time has elapsed.
2) Press this button to select the required operating time. An indicator light
automatically indicates the selected operating time.
3) To select the continuous operating mode, press the button repeatedly until there
are no more indicator lights lit up.
Important note
: When the unit is not in use, switch it off and unplug it.
INSTALLING & REMOVING FILTERS
FILTER REPLACE INDICATOR
When the POWER light flashes continuously, the filter needs to be replaced.
Replace the filter according to the directions then hold the POWER/UV-C button for 5
seconds to restart the system. The light will stop flickering.
*Combination Filter will last approximately 6 months.
1.
Open the front cover from the top.
2.
Remove the combination filter by pulling the two strips.
3.
Insert a new Combination Filter into the unit. Use the strips on the filter to
determine the correct installation direction.
4.
Reattach the extra Pre-filter to the Combination Filter.
5.
Reattach the front cover of the unit and securely latch it into place.
6.
Press and hold the POWER/UV-C Button for 5 seconds to reset the Filter Change
Indicator.
