EN
9
GETTING STARTED
BATTERIES
Batteries are supplied with this product:
• Main unit
3 x UM-4 (AAA) 1.5V
• Remote unit
1 x UM-3 (AA) 1.5V
Insert batteries before first use, matching the polarity as
shown in the battery compartment. For best results, install
batteries in the remote sensor before the main unit. Press
RESET
after each battery change.
NOTE
Do not use rechargeable batteries. Batteries should
not be exposed to excessive heat such as sunshine or fire.
shows when batteries are low.
UNIT
LOCATION
Main
Weather Forecast Area
Remote
Temperature / Humidity Area
UV Sensor
UVI / Barometric Pressure Area
NOTE
It is recommended that you use alkaline batteries
with this product for longer performance.
AC ADAPTOR (MAIN UNIT)
The batteries serve as a back-up power supply. For
continuous use, please install the AC adaptor at the base
of the unit.
Make sure the adaptor is not obstructed and the adaptor
socket is easily accessible to the unit.
To be completely disconnected from the power input, the
adaptor should be disconnected from the main unit.
NOTE
The main unit and adaptor should not be exposed
to wet conditions. No objects filled with liquid, such as
vases, should be placed on the main unit and adaptor.
CHANGE SETTINGS
1. Press
SELECT
to switch between Areas.
indicates the selected Area.
2. Most
Areas
have
alternate
display
options
(for example, Clock / Alarm or Barometer / UVI).
Press
MODE
to switch options, or
ALARM
to
switch between clock and alarm.
3. Press and hold
MODE
for 2 seconds to enter setting
mode.
4. Press
UP
or
DOWN
to change settings.
5. Press
MODE
to confirm.
REMOTE SENSOR
This product is shipped with RTGN318 / RTGN318D /
RTGN318A Thermo / Hygro Sensor. The main unit can
collect data from up to 6 sensors (5 Thermo / Hygro Sensors
and 1 UV Sensor). (Additional sensors are sold separately.
Visit www.oregonscientific.com for additional sensors.)
The RTGN318 / RTGN318D / RTGN318A Sensor collects
temperature and humidity readings, and signals from official
time-keeping organizations for the radio-controlled clock.
SET UP THERMO / HYGRO SENSOR
1. Open the battery compartment.
Summary of Contents for BAR908HG
Page 1: ...Metal Weather Station Model BAR908HG BAR908HGU BAR908HGA User Manual ...
Page 65: ...FR 2 Caractéristiques 19 A Propos d Oregon Scientific 20 Europe Déclaration de Conformité 20 ...
Page 106: ...NL 2 Over Oregon Scientific 21 EU Conformiteits verklaring 21 ...
Page 166: ... 2008 Oregon Scientific All rights reserved 086L005716 018 ...