7
EN
SETUP REMOTE SENSOR
1. Open the battery compartment with a small Phillips
screwdriver.
2. Insert the batteries.
3. Set the channel and radio signal format. The
switches are located in the battery compartment.
4. Press
RESET
. Then set the temperature unit.
SWITCH
OPTION
Channel
If you are using more than one
sensor, select a different
channel for each sensor.
Radio Signal Format
EU (DCF) / UK (MSF)
SWITCH
OPTION
Temp
˚C / ˚F
5. Close the battery compartment and place the
sensor in your desired location.
For best results:
• Insert the batteries and select the channel before
you mount the sensor.
• Place the sensor out of direct sunlight and moisture.
• Do not place the sensor more than 30 metres (100
feet) from the main (indoor) unit.
• Position the sensor so that it faces the main (indoor)
unit, minimizing obstructions such as doors, walls,
and furniture.
• Place the sensor in a location with a clear view to
the sky, away from metallic or electronic objects.
• Position the sensor close to the main unit during
cold winter months as below-freezing temperatures
may affect battery performance and signal
transmission.
You may need to experiment with various locations to
get the best results.
REMOTE SENSOR SIGNAL
Initial reception takes 2-10 minutes, and is initiated
when you first setup the unit, and whenever you press
RESET
. Once complete, the reception icon will stop
blinking and show the signal strength by displaying
between 1 and 4 waves.
AWS899_EN_R19
10/26/05, 6:29 PM
7
