background image

27

- The ATC5K is specifically designed for extreme sports and is waterproof, it 

is for this reason that we have made the microphone less sensitive.

Further Help

We make every effort to ensure the accuracy and appropriateness of the
information provided on our products. We encourage you to contact our
Technical Support Team at [email protected] with any problems
and/or suggestions, or, call our Customer Service Department 
at 1-800-853-8883. Our service representatives will be happy to help you. 

Please note that the Technical Support Team cannot issue or authorize
any RMA's or replacements. For an RMA or replacement please contact
our Customer Service Department.

Oregon Scientific, Inc.

19861 SW 95th Avenue 

Tualatin, OR 97062, USA

Hotline: 1-800-853-8883 

Website: www2.oregonscientific.com

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

WARNING:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for help.
“ This Class B digital apparatus complies with Canadian ICES-003.”
“ Cet appareil mumérique de la class B est conforme à la norme NMB-003 du Canada”
This product has passed JIS7 Standard for Waterproof Test.
This product has passed EN60065:2002 performance test for vibration.

P/N:3001000778

ATC5K_manual-US0710.qxd  8/18/08  5:40 PM  Page 16

Summary of Contents for ATC5K

















Reviews: