background image

Table of Contents

Maintenance and Customer Service, Important Electrical
Information, Important Safety Instructions  . . . . . . . . . . . . . . . . page

2

To Operate, Maintenance,   . . . . . . . . . . . . . . . . . . . . . . . . . . . page 

3

Warranty, Safeguards, Accessories, Troubleshooting Guide,
Parts Included,   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 

4

Maintenance and Customer Service

Your Oreck Compact Vacuum Cleaner is a product of precise
engineering. The motor bearings are permanently lubricated and
should not be oiled. If you require additional information or have
problems with your Oreck appliance, you may call ORECK customer
service at: 0845 603 0153.

Or write to:

Oreck UK
P.O. Box 107
Exeter
Devon
EX2 8ZQ
Attention: Oreck Customer Service

Please specify the model number and serial/code number which can be
found on the data plate on the back of the vacuum. 

Save your sales or purchase slip. Should your Oreck appliance require
warranty service, present this slip to the Authorized Service Center as
your proof of purchase date.

Important Electrical Information

The wires in the main lead are coloured in accordance with the following
code:

Blue - Neutral     Brown - Live

If the colours of the wires in the main lead of this appliance do not
correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal
marked with the letter or coloured black. The wire coloured brown
must be connected to the terminal marked with the letter or coloured
red. Do not make any connection to the terminal marked E or
or coloured green and yellow.

This appliance is double insulated and no earth connection is necessary.

If you remove the plug from power supply cord, dispose of it. A
shock hazard could result if incorrect plug is inserted into a 13
AMP socket outlet.

When changing fuse, use 5 AMP or same size replacement
fuse.

Never use the plug without the fuse cover fitted in place.

The fuse carrier is red and hinged to the plug. Do not use the plug
if it is different.

If necessary, you may contact customer service for replacement
fuse covers.

MOTOR PROTECTION SYSTEM: If fine materials such as soot,
cement, plaster dust, copy machine powder, etc. are picked up,
the bag surface may seal and cause the motor to shut off to
avoid over-heating.  If this happens, turn the switch off and
unplug the cleaner.  Replace filter bag. Check and clear any
clogs in hose or accessories.  After approximately 30 min. the
motor will have cooled and the cleaner will be ready to use.

Note: The cleaner must remain unplugged for 30 minutes
for motor to cool and system to reset.

2

!

BEFORE OPERATING CLEANER,

READ ALL INSTRUCTIONS IN

THIS MANUAL CAREFULLY.

When using an electrical appliance, basic 

precautions should always be followed, 

including the following:

READ ALL INSTRUCTIONS BEFORE

USING THIS VACUUM CLEANER 

WARNING

To reduce the risk of fire, 

electric shock, or injury:

IMPORTANT SAFETY

INSTRUCTIONS

• Do not leave appliance unattended when plugged in.

Unplug from outlet when not in use and before servicing.

• Do not use outdoors or on wet surfaces.

• Do not allow to be used as a toy. Close attention is

necessary when used by or near children.

• Use only as described in this manual.

• Do not use with damaged cord or plug. If appliance is not

working as it should, has been dropped, damaged, left
outdoors, or dropped into water, return it to a service
center. Call 0845 603 0153 for the service center nearest
you.

• Do not pull or carry by cord, use cord as a handle, close

door on cord, or pull cord around sharp edges or corners.
Do not run appliance over cord. Keep cord away from
heated surfaces.

• Do not unplug by pulling on cord. To unplug, grasp the

plug, not the cord.

• Do not handle plug or appliance with wet hands.

• Do not put any object into openings. Do not use with any

opening blocked; keep free of dust, lint, hair and anything
else that may reduce air flow.

• Keep hair, loose clothing, fingers and all parts of body

away from openings and moving parts.

• Do not use to pick up anything that is burning or smoking,

such as cigarettes, matches, or hot ashes.

• Do not use without filter bag assembly in place.

• Turn off all controls before unplugging.

• Use extra care when cleaning on stairs.

• Do not use to pick up flammable or combustible liquids,

such as gasoline, or use in areas where they may be
present.

SAVE THESE INSTRUCTIONS

Household Use Only

 

 

 

     

 

              

 

 

 

 

 

 

   

 

 

Summary of Contents for XL BB870-ED

Page 1: ... L Y A M A Z I N G IMPORTANT SAVE THIS BOOKLET Includes Safety Warnings Parts List Operating Instructions Accessories List Warranty Trouble Diagnosis Compact Canister Vacuum 72080 07 REV B Models BB870 ED BB870 QD BB870 EW ...

Page 2: ...YSTEM If fine materials such as soot cement plaster dust copy machine powder etc are picked up the bag surface may seal and cause the motor to shut off to avoid over heating If this happens turn the switch off and unplug the cleaner Replace filter bag Check and clear any clogs in hose or accessories After approximately 30 min the motor will have cooled and the cleaner will be ready to use Note The...

Page 3: ... suction port Attach Caddy and Insert Tools BB870 ED BB870 EW fig 5 Locate caddy clip indents at top rear corners of appliance Place appliance on firm nonslip surface or hold in your lap Grasp handle firmly Place end of caddy in outside indent then strongly push and pull other end of caddy into opposite indent Be sure rims on caddy openings face up Avoid trapping fingers when caddy snaps on painfu...

Page 4: ... Damage to motor may occur Be sure bag gasket is in place If the white bag gasket is damaged or lost replace at once Part No 72017 02 For best results change disposable filter bag regularly even if it is not completely full An extremely dirty bag or a bag close to full will affect the suction of the cleaner and can create excessive motor heat that could damage the motor A good practice is to chang...

Reviews: