Oreck SILVER U3770HH, Service Parts List

Page: 2 / 18

Data Label
2
Product Information
• Minimum water lift: 9 in. @ nozzle sealed suction
• Power consumption 120V/60Hz: 4.0 amps, 480 watts
• Weight: 8 lbs. without power cord
• Power cord rating - Domestic 18/2 SJT 105°C
SN
3600HH0000 0 6 7 2
-
TYPE 7
MODEL:
XL3600HH
120 VOLTS 60 HZ 4.0 AMP
NEW ORLEANS, LA 70123 U.S.A.
FOR HOUSEHOLD USE ONLY
POUR USAGE MENAGER
06095
3076689
®
®
7
CONFORMS TO UL STD 1017
CERTIFIED TO CSA C22.2 NO.243-01
DATE:
W: 3 YR/10HSG
Customer Service US 1-800-989-3535
Canada 1-888-676-7325 www.oreck.com
Type Code : Represents product service
revision number.
Type 4: Initial production.
Type 5: Improved lower tube.
Type 6: Hardwire handle.
Type 7: Improved baseplate with
one-piece wireform.
Julian Date Code :
Represents date of manufacture.
06 Represents the year.
095 Represents the day in that year.
Service Information
• Component configuration on exploded view may differ in
case of specific versions. However, the actual
components are distinguished by means of item and
part numbers.
• If a repair has been made, make sure that all functions
of the appliance are working correctly.
• Spare parts have been standardized as much as
possible and the part may not be the exact replacement
part.
• Baseplate assemblies with one-piece wireform are
interchangeable on Type 4-6 units.
Description Order #
Fan Housing Removal Tool (This tool is designed to assist in removing 75377-01
fan housing assembly from the motor.)
Strain Relief Pliers (This tool is designed to remove the cord retainer, 75383-01
part #33.)
Retainer Clip Tool ****Use 7/32” nut driver. (This tool is designed 75485-01 NLA
to assist in adding retainer clips, part #77, to baseplate.)
TOOLS
To remove the retainer clips from the
baseplate, using a pair of side cutting
pliers, carefully cut the retainer clips
away from the posts. Remove the
retainer clips. Be careful not to
damage the posts.
To replace the retainer clips, position
the retainer clips on the posts with
indentation facing downward. Use a
7/32” nut driver to force the retainer
clips down. Retainer clip should fit
firmly against wireform.