•
Sol+ is now establishing the connection to the belt printer
•
Once the belt printer is detected, the Get more LED lights up blue for two
minutes. In addition, a test page is printed. This test page includes:
−
Figure 1 (if available)
−
Successfully connected to: <Sol serial no.>
−
Figure 2 (if available)
•
The display shows the serial number of the Sol+ unit
•
Select OK to confirm active connection
•
Select Cancel to end the connection
2.
Belt printer Test
To launch the belt printer test, open the Get more
menu and select Test
belt printer Test.
Click on this test to check the device connection in
advance and subsequently print the test page.
Printing the test page on the belt printer enables
you to check the device's functionality.
This test page includes:
Figure 1 (if available)
Successfully connected to: <Sol serial no.>
Figure 2 (if available)
Select Ok or Cancel to return to the test menu.
Belt Printer Test