background image

–  user guide 

 

 

 

Correct handling

 

 

Safety precautions 

 
ORDERMAN DON should be used only with an ORDERMAN DON battery 
resp. with an ORDERMAN DON power supply unit and with the entry pen of the 
ORDERMAN DON touch pen. 
 
ORDERMAN DON should never be exposed to rain, hail or snow. 
 
If the unit gets damaged, it must be checked by your ORDERMAN dealer for 
possible defects. 
 
The touch-area of the unit is made of glass, and should therefore be treated 

carefully. 
 
Never short-circuit the battery and the charging contact surfaces. 
Never expose the battery to open fire – danger of explosion ! 
 
Even if tests have proved, that ORDERMAN DON can survive falls of approx.  
1 m and still be in working condition with only the case damaged, please treat 
the unit with the appropriate care. 
 
For the operation of the unit do not use a fountain pen, a pencil or other sharp 
pens. The surface of the touch-area can get scratched. Use only the entry pen 
of the ORDERMAN DON touch pen. 

 

 

 
 
 

Care 

 

Clean ORDERMAN DON with a soft, clean cloth. Never use detergents, 
chemicals or compressed air to remove dust. 
Be careful, that the battery and the charging contact surfaces do not get dirty. 
This can prolong the charging time of the battery. 
 

 
 

Summary of Contents for DON
















Reviews: