7
3.8 Pause Button
Pressing the 'PAUSE' button during dialling will put a 2
second pause in the dialling sequence. This is needed on
some telephone systems where you may be required to dial
an access code to obtain a line before dialling your number.
3.9 Recall Button
If you are connected to a telephone system the 'RECALL'
button is used for transferring calls or accessing other
system features.
On a normal telephone line the 'RECALL' button may be
used for select services supplied by the telephone line
provider.
3.10 Memory Buttons
To store numbers into the memory locations:
1. Press the SELECT
2. Enter the num,ber to be stored on the keypad
3. Pres the SELECT button
4. Use the keypad to enter the name (i.e To enter a J press the
number 5 key once, to enter a O press the 6 key three times)
5. Press the memory location key where you wish to store
the memory. Use the shift button to access the two-touch
Warranty
6
locations.
3.11 Phonebook memory
The DBT 3000 can store up to 200 names and phone
numbers. In the event of power failure or unplugging the
unit, these memories are saved.
To store a name and number:
1. Press the MENU button once, 'Phonebook' will be
displayed
2. Press the SELECT button. 'Add Contacts ?' will be
displayed
3. Enter the number you wish to store. Press SELECT button
4. Enter name to store using the keypad. (i.e To enter a J
press the number 5 key once, to enter a O press the 6 key
three times)
5. Press the SELECT button to complete
6. You may now enter another contact or press CANCEL
button to return to normal mode
NOTE: While you are entering the name and number,
pressing the DELETE button will remove the last digit or
letter entered.
When you enter the phonebook mode, the number of
phonebook records is indicated on the display.
To store the last number dialled into the phonebook:
1. Press the REDIAL button and the last number that was
dialled will be displayed on the display
2. Press the SELECT key and the number will be displayed
again
3. Press the SELECT button
4. Enter the name you wish to assign to the phonebook
record
5. Press the SELECT button
To check the phonebook records:
1. Press the MENU button, the 'Phonebook' will be
displayed with the number of records
2. Use the scroll keys to move through the records
To fast search for a specific name & number:
1. Press the MENU button, the 'Phonebook' will be
displayed with the number of records
2. Use the keypad to enter the first letter of the name
3. Press the SELECT button to jump to the first record that
starts with this letter
4. Use the scroll keys to navigate the records
To dial a phonebook record:
Once you have navigated to the record you want to dial, lift
the handset or press the SPEAKER/HEADSET button.
To delete a phonebook record:
1. Navigate to the record you want to delete
2. Press the DELETE button, 'Delete ?' will be displayed
3. Press the SELECT button to confirm or CANCEL to not
proceed
3.12 Caller Display
The caller ID facility on your DBT 3000 is subject to your
network connection. Contact you line provider to activate
this service.
When the telephone rings, the incoming number will be
displayed (Unless it is withheld) and stored in the phones
memory. The DBT 3000 has a caller record capacity of 99.
To review calls in the caller display log:
1. When new calls have been received, the RED LED will
flash and the number of new calls displayed
2. The caller display log will show the number of new calls
