3
1. INSTALLATION
Connect one end of the coil cord to the handset and the
other end to the handset socket located on the left hand
side of the phone. Replace the handset to the cradle.
Connect the small plug of the telephone line cord to the
socket at the back of the unit and the other plug to the
telephone socket at the wall.
Connect the power adaptor lead to the back of the phone
and then plug the adaptor into a main socket and turn on.
Lift the handset to check dial tone is being received.
The DBT 3000 telephone is supplied with the mounting
bracket fixed in the wall mount position. For desk
purposes, you should remove the bracket and then replace
in the reverse position.
2. SETUP
2.1 Setting The Time
- Press the MENU button twice. 'System' is displayed.
- Press the SELECT key. 'Set Time' is displayed.
- Press the SELECT key again.
Installation & Setup
2
Setup
- The two digits for the hour will flash. Adjust using the
scroll keys then press SELECT again.
- The two digits for the minutes will flash. Adjust using
the scroll keys then press SELECT again.
- The two digits for the date will flash. Adjust using the
scroll keys then press SELECT again.
- The two digits for the month will flash. Adjust using the
scroll keys then press SELECT again.
- Press the CANCEL key twice to return to standby mode.
2.2 Set Time to 12/24 Hour Mode
- Press the MENU button twice. 'System' is displayed.
- Press the SELECT key.
- Scroll to 'Time Mode' in the system menu and press
SELECT key.
- Use the scroll keys to select 12/24 hours.
- Press SELECT key again.
- Press the CANCEL key twice to return to standby mode.
NOTE: By default the telephone is set to 24 hour mode.
2.3 Setting The LCD Contrast
- Press the MENU button twice. 'System' is displayed.
- Press the SELECT key.
- Scroll to 'LCD Contrast' in the system menu and press
the SELECT key.
- Use the scroll keys to adjust the contrast as required.
- Press the CANCEL key twice to return to standby mode.
2.4 Setting The Recall Timing
- Press the MENU button twice. 'System' is displayed.
- Press the SELECT key.
- Scroll to 'Set Recall' in the system menu and press
SELECT key.
- TBR is displayed. Press SELECT again.
- Use the scroll keys to the TBR timing required.
- Press SELECT key again.
- Press the CANCEL key twice to return to standby mode.
2.5 Setting Message Waiting
- Press the MENU button twice. 'System' is displayed.
- Press the SELECT key.
- Scroll to 'Message Waiting' in the system menu and press
SELECT key.
- Use the scroll keys to select 90V DC or Line Reversal.
- If 90V DC is selected, you can then select 'On' or 'Off'
- If Line Reversal is selected , you can then select 'Off',
'Polarity Normal' or 'Polarity Reversed'.
- Press SELECT key again.
- Press the CANCEL key twice to return to standby mode.
