Charging the device
The device contains a rechargeable Li-ion battery (not removable) which can be charged by per-
forming the following process:
1. Connect the USB power adapter to a standard electrical outlet (220V / 50Hz) that
you are sure it is in a good condition.
2. Plug in the male connector USB-A of the cable into the adapter.
3. Plug in the male connector USB-C of the cable into port 4 (USB-C) of the device.
The device also has an auxiliary charge port (8) of the DC type 3.5mm. To charge using this port,
a DC 3.5mm 5V 2A charger is required (not included).
Precautions and advices about the charging
• The device cannot be charged using both charging ports (4) and (8) at the same time. It could
cause serious damage.
• The device does not need to reach 0% (completely discharged battery) to charge it. In fact,
to extend the life of your battery, it is recommended to charge it when the level is between
15% and 30% of its total capacity. By default, your ORBYS F21 will alert you that it needs to
be charged when the battery is at 15%.
• It is recommended not to drain the battery completely as this may cause the tablet not to
turn on. If your ORBYS F21 is completely discharged, put it on charge and wait about 10
minutes to start it (to acquire sufficient charge). The battery logo will appear on the screen
when it is ready. You can then turn your device on.
• The charging time will depend on whether it is charged via a power adapter or via a USB
port on a PC.
• The use of non-original power cables or adapters may cause serious damage to the device
and their use may result in the loss of warranty.
• The battery is not removable and must not be touched under any circumstances. Any re-
moval or modification of the battery may result in the loss of the warranty.
• It is not recommended to use the device while it is charging. This will cause the charging to
be much slower
The battery level is shown on the main display of the device with this symbol.
You can monitor the battery usage, view the percentage and activate the saving options from
the menu:
Use only original adapters with the following requirements:
INPUT: AC 100V~240V, 50/60 Hz <> OUTPUT: 5V - 2A
The use of other types of adapters could cause serious damage to the device
and present a risk to people.
Applications > Settings > Battery
Adapter and cable included.