OPERATION
•
(FIGURE D-E )
To charge battery off-board,
first remove battery charger from the machine.
Disconnect main charger power cords.
•
(FIGURE F)
Grab charger handle and pull
charger slightly forward, then up.
•
(FIGURE G)
Plug battery charger into power
outlet, then plug battery into charger.
On-Board (Hybrid) Charging
ORBOT LiFe is capable of hybrid charging.
This feature allows the LiFe, when plugged into
a wall socket, to operate off AC power while
simultaneously charging the battery.
•
(FIGURE F)
To use hybrid charging, first
install the battery charger into the battery-
charging compartment.
•
(FIGURE D and E)
Connect the main
charger power cords to the on-board life
charger power cords.
•
(FIGURE H)
Next, connect the main AC
power extension-cord to the machine power
quick-disconnect. Finally, connect the main AC
power extension-cord to a wall socket.
Battery Only Operation
ORBOT LiFe is capable of operating without
use of the charger. This allows continuous
runtime operation. A second battery can be
charged remotely while machine is in use.
To use this feature, simply install battery into
machine (see battery installation) and operate.
CAUTION
Battery Maintenance
• Store batteries in a cool dry location.
• Avoid discharging the battery fully
VERY IMPORTANT TIP!
ALWAYS FULLY CHARGE BATTERY
IMMEDIATELY
after each use!
DO NOT STORE DISCHARGED BATTERY!
RESULT:
Will VOID battery warranty!
10
FIGURE D
FIGURE E
FIGURE F
FIGURE G
FIGURE H
