Orbitalum MOBILE WELDER OC PLUS Operating Instructions Manual Download

Page: 15 / 204

MOBILE WELDER OC PLUS

ENGLISH

ORBITALUM TOOLS GmbH

, D-78224 Singen www.orbitalum.com

2.7

Remaining risks

2.7.1

Injury through high weight

The power supply weighs

• 15.6 kg (34.39 lbs) - MOBILE WELDER (Plus)

•

21.0 kg (46.30 lbs) - MOBILE WELDER (OC/OC Plus)

• 26 kg (57.32 lbs) – ORBIMAT 180 SW

• 35.4 kg (78.04 lbs) – ORBIMAT 300 SW

A significant health hazard exists during lifting.

Danger of impact and crushing exists in the following situations:

CAUTION!

Falling of the power supply during transportation or setting up.

CAUTION!

Falling of the power supply as the result of being set down improperly.

►

When lifting the power supply do not exceed the permissible total weight of 25 kg for men and
15 kg for women.

►

Use a suitable transport medium to transport the welding power supply.

►

Always use 2 persons to lift and remove the welding power supply from the packaging.

►

Place the welding power supply on a stable base.

►

Wear safety shoes.

►

Do not transport the device by crane. Use handles, straps or holders for hand transport only.

►

Before transporting, check the fastening screws between the power supply and the cooling

unit for secure fit; tighten if necessary.

Summary of Contents for MOBILE WELDER OC PLUS













































































































































































































Search results

Summary of Contents for MOBILE WELDER OC PLUS

Reviews:

Related manuals for MOBILE WELDER OC PLUS

Brands by name

Popular brands

Orbitalum MOBILE WELDER OC PLUS, Operating Instructions Manual

Search results

Summary of Contents for MOBILE WELDER OC PLUS

Reviews:

Related manuals for MOBILE WELDER OC PLUS

Brands by name

Popular brands