Orbit OC 7520, Owner'S Manual

Page: 7 / 13

7
3 PROGRAMMING
(with build-in options RS232 and Analogue output)
Software Version 7520_V5.hex CS: 1120
The menu will be opened with the key MENU. With the same key the submenu will scroll
at the display. The required parameter will be confirmed with ACK. Its value will be set
with UP or DOWN. The flashing digit - Cursor - will be positioned with ACK. The sign and
the decimal point can be set when the flashing display is positioned outside of the display
(no digit flashing). The decimal point will be adjusted with UP, the sign with DOWN.
KEY
DISPLAY FUNCTION
MENU
OrdEr Display resolution
ACK CCCC.dd Select with UP, DOWN and SET from CCCCCC. to C.ddddd
MENU SP1 Set Point 1
ACK 001000 Select with UP, DOWN and SET
MENU SP2 Set Point 2
ACK 001500 Select with UP, DOWN and SET
MENU SP3 Set Point 3
ACK 002500 Select with UP, DOWN and SET
MENU SP4 Set Point 4
ACK 003000 Select with UP, DOWN and SET
MENU PrESEt Display Offset 6 digits with Decimal Point and Sign
ACK 000000 Select with UP, DOWN and SET
MENU AOUtL Display value for Analogue Output 0/4mA and 0/-10V.
ACK 00000 Select witht UP, DOWN and SET
MENU AOUtH Display value for Analogue Output 20mA and +10V.
ACK 01000 Select with UP, DOWN and SET
MENU BAUD Baud Rate
ACK 19200 Select with UP, DOWN and SET from 300 to 19200 bd.
MENU rS Adr Address of Data Port: 0 activates RS232. One of addresses
ACK ADDR01 01 ... 31 activates RS485
MENU dEIin Termination sign for data output
ACK nonE nonE, Cr, LF, CrLF, nul
MENU IntEr Transmission Interval of the RS Port
ACK nonE nonE, 0.1, 0.2, 0.5, 1.0, 3.0, 5.0, 10.0, Hand
MENU Fn bcd (*) Number of digits for conversion into RS232/485
ACK POS 6 POS 1 … POS 6 positive BCD parallel logik (*)
nEG 1 … nEG 6 negative BCD parallel logik (*)
MENU Fn SIG Activation of SIGN
ACK nEG Selection of the SIGN control
nEG “+” at Pin 25 illuminates the SIGN
POS “0” at Pin 25 illuminates the SIGN
OFF the SIGN is deactivated
MENU OC7520 Measuring Mode