Orbit JETRONIC-BOX – Manual 1.2
3/4/5: RC-3/4/5-CONTROL Menu
To activate the 3/4/5:RC3/4/5-CONTROL menu, first press the SET key, then use the Up/Down
keys to switch between the available parameters.
To change a parameter, first press the SET key, then use the Up/Down keys to switch between the
available values. A
?
marks the value to be set. Pressing the SET key finishes the procedure and
saves the new value.
To leave the 3:RC3/4/5-CONTROL menu and to return to the SETUP menu, press the SET key for
more than 2 seconds (ESC).
Pressing the SET key for more than 2 seconds again will return you to the operating status display
(
>>>
changes to
<<<
, ESC).
13
