DripMaster
24
25
DripMaster
®
SECTION
8
DESERT LANDSCAPING
A
Irrigation Valve
B
Pressure Compensating Dripper with a Tube Stake
C
Loop Stake
D
End Cap
1
Water Supply—Connect a Pressure Regulator (part # 67740) to the
Y-Filter and attach a Universal Male Adapter (part # 67454 or 67470). Next
attach ½" Distribution/Supply line to the exposed end.
(See the top of page 26)
IMPORTANT: Use a Pressure Regulator to avoid damage to the Drip-
Irrigation system.
Common Projects
4
Cut Soaker Tube to desired length
and insert a ¼" End Plug.
Note: Keep each ¼" Soaker Tube
length to less than 15'.
5
Remove the Automatic Drain
Valve, attached to the end of the
PVC pipe and flush the line to
remove any debris.
6
Adjust the flow rate by turning
the Flow Control Screw.
IMPORTANT: Do not attach more
than 14 4-Port Manifolds
Supplies Needed
- ¾" Automatic Drain Valve (part # 51041)
- 4-Port Adjustable Manifold (part # 66005 or 67005)
- ¼" Loop Stakes (part # 65730 or 66730)
- ¼"
Soaker Tubing (part # 61073, 67321, 67330 or 67331)
- ¼" End Plugs (part # 66403, or 67403 or the ¼" Barbed Assortment Pack
(part # 66431 or 67431)
- ¾" Slip x ½" Threaded Tees
- ½" Risers
Flow Control
4
6
A
B
D
C
Orbit
®
DripMaster
®
|
Installation Guide
Orbit
®
DripMaster
®
|
Installation Guide
