DripMaster
18
19
DripMaster
®
SECTION
6
Supplies Needed
- 8-Port Adjustable Manifold (part # 61008P or 67000)
Or
- 4-Port Adjustable Manifold (part # 66005 or 67005)
- The appropriate Drip-Irrigation Sprinkler listed above
- ¼" Tube Straps (part # 65715 or 66715)
- ¼" Distribution/Supply Tube (part # 67300, 67301 or 67303)
Common Retrofit Projects
SECTION
6
FLOWER BEDS, GROUND COVER,
SHRUBS AND LARGE PLANTS
Replacing inefficient shrub heads with Drip-Irrigation
1
Remove shrub heads from risers and replace with “Full-Flow 4-Port
Manifolds.”
2
Remove Barb Caps from the manifolds and attach ¼" Distribution/
Supply Lines to each exposed ¼" Barb. Run individual ¼" Distribution/
Supply Line to each Low-Volume Sprinkler Head. Flush lines to clear any
debris.
IMPORTANT: Full-Flow Manifolds
do not have an internal pressure
regulator. To avoid high pressure
failures install ¼" High Pressure
Clamps on all ¼" connections.
IMPORTANT: A single ¼"
Distribution/Supply Line should not
exceed 30’.
Continued on next page
Common Retrofit Projects
1
2
Orbit
®
DripMaster
®
|
Installation Guide
Orbit
®
DripMaster
®
|
Installation Guide
