6
•
Press the
ENTER
button. The display now reads “SET
MONTH.” Set the current month by pressing either the
or button.
•
Press the
ENTER
button. The display now reads “SET
DATE.” Set the current day of the month by pressing either
the or button.
•
Exit the set time and date mode at any time by turning the
selection dial.
Determine a Watering Plan
See page 0 for instructions.
Section 3:
Programming Your Timer
Set Start Times
IMPORTANT: Multiple start times in Program A will repeat the water-
ing program. Generally, only one cycle start time is required for each
program (A and B) Start times do not correspond to individual stations.
•
Turn the selection dial to
START TIMES
for the program you
wish to set (A or B).
•
Set Start Time 1 using the and buttons.
•
If you wish to set additional start times (up to six) for the same
program, press the
NEXT
button or
ENTER
button.
•
To remove a start time press
CLEAR
.
•
Exit the set start time mode by turning the selection dial.
Set Station Watering Durations
•
Turn the selection dial to
DURATION
for the program you
wish to set (A or B).
•
Set the desired duration (0 - 10 minutes) for the station
displayed. Press
NEXT
or
ENTER
to advance to
the next station. Press
CLEAR
to remove a duration.
IMPORTANT: Each station can have two durations. For example:
Station 1 can have a duration of 5 minutes in Program A and a
duration of 25 minutes in Program B. Typically a station has only
one duration in either Program A of B. A station with a setting of 0
minutes will not water with that Program.
•
If two programs are needed repeat these steps for the other
program.
•
Exit the set watering durations mode by turning the
selection dial.
NO
W
AT
ER
IN
G
DA
Y /
PE
RI
OD
Figure 2:
Program A and Program B Dial Settings
C
C
07WTM002598 57926-24 rA.indd 6
2/16/07 2:07:20 PM
