2
d. Follow
FIG.1
, slightly loosen 2 pcs
Bolts (97)
a little
on the back
of Main Frame, so the
Support Bracket (103)
can slide between
two
bolts (97)
and Main Frame.
NOTE: Do not tighten at this
moment.
e. Attach the
Seat Tube (b)
and fully tighten with 2pcs
Screws (a)
and 2pcs
Bolts (98).
f.Go back to fully tighten 2pcs
Bolts (97)
on the back of the Main
Frame.
g. Make sure the right circle areas’ Bolts and Screws are fully
tightened before moving to the next step.
h. NOTE: 2pcs
Screws, Flat Head (M8x20mm)(a)
have
pre-attached to the
Seat Linkage (c)
.
i.Remove the above screws from the
Seat Linkage (c)
.
