10
7. Adjustment
1.
Resistance can be adjusted by tension control to increase or decrease the exercise intensity.
2.
After long term use, if you believe the turning parts are loose, please tighten the bolts or screws
.
8. Maintenance and Treatment
1.
Verify that all the bolts and nuts are locked properly and the turning parts should be turned freely without
damaged parts.
2.
Clean the equipment with soap and slightly damp cloth only. Please do not use any solvent to clean the
equipment.
Malfunctions and treatment
Malfunction Reason
Treatment
Base is unstable.
1.
Floor is not flat or there is
small object under the front or
rear stabilizer.
2.
The front and rear base feet
have not been leveled when
assembling.
1.
Remove the object.
2.
Adjust the front and rear base feet.
Right and Left
handlebar tubes or
seat cushion are
shaking.
The screw loose.
Tighten the screws.
Loud noise from the
moving parts.
The interval of the parts has not
been tightened correctly.
Open the covers to check.
No resistance when
using the
equipment.
1.
The interval of the magnetic
resistance increases.
2.
Tension control is damaged.
3.
Running belt is slip.
4. The axletree is damaged.
1.
Open the covers to check.
2. Replace
the
Tension control.
3.
Open the covers to check.
4. Replace
the
axletree.
