Orbis Thermo X, User Manual

Page: 89 / 96

English
- 87 -
User Manual - Thermo X
Memory address
(ONLY when bUS=YES)
Adr
Upon initial start-up
procedure, default
parameters are
enforced an a new
address is generated
Settings guard
password
PAS 123 000 ÷ 999
For use in public
premises
Total number of hours
of output operation
Tot 000 000 ÷ 65535 (7 years)
Total number of hours
when output relay in
ON status
Battery charge status bAt 100% ÷ 0%
The initial value
depends on the battery
charge
Display brightness
adjustment
(nt 8 0 ÷ 15
To enter advanced programming and change the parameters
1) Hold down for 3 secs until the display reads “ rEG ”
2) Press or to select the desired value
3) Press to confi rm
4) Repeat steps from 2) to 3) to change the remaining Advanced Programmimg
parameters
5) After confi rming the parameter “ (nt ” the device resumes the previous operating
status (Automatic, Manual or System Off)
Description of advanced programming parameters
TEMPERATURE-CONTROL METHOD ( rEG )
The choice of the temperature-control method depends on the features of the system
it is applied to.
In most cases ON/OFF temperature-control is recommended (which is
the default choice), but Proportional temperature control is preferable in
premises with a high thermal drift ( large rooms, fan-coil systems, cast-iron
radiators , etc)
The Proportional method can only be selected for the WINTER-HEATING
mode.