THA 200 THA 315 THA 465
40
INTERNAL SETTING OF THE APPLIANCE
The appliance has 2 internal settings: Temperature Compensation and Open Window mode. To
access them, while in standby mode, press and hold the button
. The display will show F0
(which is the Temperature Compensation mode) and if you press the button
F1 (Open
Window mode) will show.
-
F0 Temperature Compensation. Compensation is initially set at 0. It may vary from -5ºC
to 5ºC. For example, if the display shows an ambient temperature of 25ºC and the real
temperature is 23ºC, you must set the parameter to -2°C to compensate for this
difference in temperature. In this way 25ºC was previously shown and now it will display
23ºC (25 - 2).
-
Open Window mode (F1). If you want to use this mode you must set a warm-up time of
60 minutes or 90 minutes. After this time, if the temperature drops 2ºC in 5 minutes, the
appliance will stop working. If you do not want to enable this feature, set the time at 0.
Set 60, 90 or 0 by pressing the buttons
and
.
-
When the mode is enabled the symbol
is displayed.