SE 2074
9
1=Low: low speed 1=MIDDLE: middle hot temperature
2=HIGH: high speed 2=HIGH: high hot temperature
Cool shot: press cold function button with above operation, you will get comfortable cool wind.
5. The concentrator & diffuser can be used on or without. To place the concentrator or diffuser you have to
fit the tabs with the holes of the nozzle and turn until it is fitted.
6. Switch off when finish using, and then remove the plug from the socket.
7. This hair dryer is foldable for better storage.
MAINTAINANCE
IMPORTANT:
Always ensure that hair dryer is disconnected from the mains supply before cleaning.
Use a damp cloth for cleaning and wipe dry. This will help preserve the original finish of your hair dryer.
Abrasive cleansers should not be used.
WARNING:
Never immerse the hair dryer in water and always ensure that plug is kept dry.
After a while of use, you should take the inlet apart and clean it .Operate method: turn the inlet toward to
opposite clock-wise direction, after cleaning it, turn toward to clockwise direction and fix it upon the hair
dryer.
Frequently clean our any hair or fluff that becomes stuck in the inlet filter. To clean may result in
overheating.
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of
their old appliance.
DECLARATION OF CONFORMITY: This device complies with the requirements of the Low Voltage
Directive 2014/35/EU and the requirements of the EMC directive 2014/30/EU.
