REW 500 A 1000 A 1500 A 2000 A
41
With the button
+
or
–
we pass through the days until we find the current day, e.g. Monday, we go to 1, or
Wednesday, we using button
+
or
–
to 3
. (Fig.26)
Fig.26
Now we press button
M
and the hour display starts to flash. With button
+
or
–
we adjust the display to the
correct hour, then press button
M
.
Now the minutes display starts to flash. With button
+
or
–
we adjust the display to the correct minute, then
press
M
. The appliance returns to the OFF position.
(Fig.27)
Fig.27
Important:
1. If you want to change the mode at any time, use the - button to go back hour by hour and press M to
change the mode to the desired one.
2. You must schedule 24/7. You can't skip days and leave them unscheduled. If you want to program a day in
which the transmitter is switched off at all times, you must select the Antifreeze mode at all hours of that
day.
3. If you want to exit at any time to set the current day of the week and time, press
. Keep in mind that
the transmitter will work with the last programming carried out on each day. That is, if you exit the schedule
after ending Wednesday (3), the device will work with the schedule you just did between Monday (1) and
Wednesday (3) but from Thursday (4) to Sunday (7) it will work with the last programming that has been
done in those days.
Now we are ready
to use the programming mode.
To activate it
, all we have to do is switch on the appliance
by pressing the button
and search for the programming mode with the button
M
until the next display
appears fluctuating between these two.
(Fig.28
) This means that the programming mode has been activated
and is now working. (This is the only way to set the programming mode).
OFF position
