MC 4600
10
•
never immerse the appliance or the drive unit in water and ensure that no liquids get into
the interior of the appliance. There is a risk of electrocution
•
never use sharp or abrasive cleaning materials or scrub sponges, this can lead to irreversible
damage to the appliance.
•
Take extreme care when cleaning the blade, as the cutting edges are very sharp. risk of
injury!
•
To clean the outside of the appliance (drive unit) use a dry, or at best
•
damp, well wrung-out cloth.
•
Then rub well until dry.Clean the accessories in warm water with detergent. Then thoroughly
rinse. It with clean water and allow it to dry completely.
PRACTICAL HINTS
−
In order to obtain smooth and finely chopped meat, distribute the meat evenly in the bowl
with the spatula.
−
Allow the appliance to cool down after each use.
−
Do not use the chopper when the appliance is empty.
−
Note: better results are obtained by using a pulse action.
−
Your chopper will chop the following:
FOOD
MAXIMUM QUANTITY MAXIMUM TIME(SECS)
Parsley
Onions
Shallots
Garlic
Biscuits
Almonds
Chestnuts
Walnuts
Gruyere, Cheddar
Boiled Eggs
Meat(Lean)
20g
150g
150g
60g
50g
200g
200g
150g
200g
200g
200g
6 secs
9 secs
9 secs
5 secs
5 secs
8 secs
12 secs
10 secs
10 secs
5 secs
6 secs
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the
environment. The crossed out “wheeled bin” symbol on the product reminds you of your
obligation, that when you dispose of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the
correct disposal of their old appliance.
DECLARATION OF CONFORMITY: This device complies with the requirements of the Low Voltage
Directive 2014/35/EU and the requirements of the EMC directive 2014/30/EU
