FDR 55
16
-
Only use the original baskets; forcing the basket into the oil container may create a risk upon removing it
when finished.
-
If you do not use the fryer for long periods of time, we recommend applying a thin layer of oil over the
complete surface, even on the resistor and sensor.
-
Do not use margarine, butter or lard. They are not suitable for frying since they emit smoke at low
temperatures.
-
If overheated, the safety system turns the device off. In order to restart it, unplug the unit and wait until
it cools. Once cooled, re-plug it in and press the "RESET" button on the back of the heating unit. To do
so you will need a thin and long tool.
Cleaning
•
Before cleaning, make sure that the device is unplugged and the oil is cooled down.
•
If you need to move the deep fryer, use the handles, never the basket or the panel.
•
For cleaning do not use aggressive products or metal sponges that can damage stainless surfaces.
Be sure to dry all items before reassembling.
•
BASKETS:
-
After each use, take out the baskets and soak them in soapy water for 20 minutes. Then use a
scourer.
•
HEATING ELEMENTS:
-
Remember that the heating elements cannot be soaked into water. Clean it with a wet cloth
and make sure to dry it after cleaning.
-
Don’t damage the heating element and the sensor, since it would affect the performance of
the device. As well, it would be dangerous.
•
OIL BASKET:
-
Take it out very carefully.
-
Soak them in soapy water for 20 minutes.
-
Then, use a non-abrasive detergent and a soft scourer.
•
Assemble the unit again and insert the oil if you want to.
•
In case that you will not use the device for a long period of time, store it in a dry, well ventilated and
moisture free place.
SERVICE AND CUSTOMER CARE
If you experience any problems with the operation of the fryer, before calling for assistance refer to the
troubleshooting guide.
