CTP 1840
16
6.
To place the guide-comb in hair clipper for bear put on top side and slide it down as shown pictures. This
guide-comb can slide to up and down for set different length.
Use tips
HAIR:
•
Should be dry and free of lotions or other liquids.
•
Comb outward with the head 6 and guide-combs (8, 9, 10, 12) to obtain maximum height/length and
facing in the same direction. Until you become familiar with hair clipper it is recommended to use the
longer measuring guide-combs first.
BEARD/MUSTACHE:
•
Use guide-comb (11) (until 9 mm of cut) with hair clipper for beard (6).
•
Starting under chin, ascend along the cheek in the direction of the ear. Measure in different directions to
cut all the isolated hairs.
•
To lighten or trim the beard, use a small level so that the hairs do not bend. With the help of the opposite
hand, hold the clipper -sharp cutter to the outside- while slowly sliding the appliance along the head.
SHAVER:
Use the shaver attachment to clean-up detailed areas. For best results, avoid holding at an angle.
EARS:
•
When trimmer inner ears, avoid inserting Grooming System (3) more than 1/4” into ear canal.
•
Rotate Grooming System in a circular motion while gently moving in and out of ear canal.
EYEBROWS:
•
Guide cutting edges to stray hairs along eyebrows with accessory (3).
•
For best results, do not use the grooming system to define entire eyebrow.
NOSE:
•
Insert the hair clipper delicately (accessory 3) and do not put the device more than 1 cm inside the nose.
•
Apply a rotating movement to the device during insertion and removal from the nose.
