CA 08160/90 IN
13
CARBON FILTER (NOT SUPPLIED)
1.
Remove the aluminum filter.
2.
Place the activated carbon filter on one side of the engine and turn counterclockwise. Repeat the same
operation on the other side.
NOTICE:
- Make sure that the filter is correctly positioned. Otherwise, it may loosen to damage the motor of the
hood.
- When the carbon filter is in place, suction power will be reduced.
- This filter cannot be washed or reused. It should be changed every 3 to 6 months depending on usage.
UTILIZATION
1.
Set the switch (1) to position I to turn on the hood light, in position 0 it will turn off.
2.
Set the switch (2) to position I, II or III to select the suction speed (low, medium or high). In position 0 it
will turn off.
CLEANING AND MAINTENANCE
Disassembly and cleaning of aluminum filters
- Follow this guide correctly to clean the filters.
- Press the filter lock button and pull down.
