Orbegozo BV 15000, Instruction Manual

Page: 12 / 23

BV 15000
12
2
．
This unit have safety design, it do not work if the jar is not install on main body properly.
3
．
Fill in the blender’s jar with desired food.
4
．
Put the cover on top of the jar and fix it. Place the measuring cup on the center of cover,
anticlockwise rock the measuring cup slightly.
5
．
Put the blender glass jar onto the main body, and turn it slightly in a clockwise so it locks with the
motor base. And the machine was fully assembled.
6
．
Turn on the blender and set required speed. Ensure to place the knob in 0 position when you stop
using the blender.
7
．
During working mode, the blue light around the knob is on.
SWITCHING ON AND OFF
Before you proceed, we need you to pay attention to the following notes:
- Do not switch on the appliance when the jar is empty.
- Do not leave the appliance switched on continuously for more than two minutes.
• To switch on the appliance with continuous speed, set the power knob to required position.
• This blender has 3 buttons with programmed functions. SMOOTHIE: to prepare smoothies or milkshakes,
speed is changing to make smoothie/milkshake with smooth texture; PULSE: impulse mode, while you press
button, it will work to max speed, stopping when you don’t press button; ICE: to crush ice, in this program
blender will work with many impulses continuously to crush ice or other hard food as nuts.
• To switch off the appliance, set the on/off switch to the '0' position.
HINTS FOR USE
- Do not overload the appliance. Do not put too many ingredients into the jar at one time.
• Cut the fruit and/or vegetables into pieces.
Make sure that the pieces of fruit and/or vegetables fit in the jar.
• Remove the jar lid from the jar.
• Put the pieces of fruit and/or vegetables into the jar.
• Assemble the appliance.
• Insert the mains plug into the wall socket.
• Switch on the appliance. The appliance chops the pieces of fruit and/or vegetables.
Turn the jar lid insert counterclockwise to remove the jar lid insert from the jar lid.
- If the pieces are too large for the filling opening of the jar lid, switch off the appliance, remove the jar lid,
and add the pieces of fruit and/or vegetables.
- Mount the jar lid onto the jar.
- Mount the jar lid insert into the jar lid.
- Switch on the appliance. The appliance chops the pieces of fruit and/or vegetables in a few seconds. The
longer the appliance is switched on, the finer the pieces of fruit and/or vegetables will be chopped.
After use, switch off the appliance, remove the mains plug from the wall socket and wait until the appliance
has cooled down.
This blender has a resettable fuse, so if after prolonged
use goes down, set the switch to 0 and unplug it while
waiting for it to cool. When it happens not touch the blade