PWT 3075
8
washer 2 on the screw, then the wheel 3, washer 4 and finally screw on the bar 5. For the other wheel
perform the same process. Once placed the wheels, you can place the bar 1 to finish the assembly of the
base, secure it with the screw provided.
OPERATING INSTRUCTIONS
Step 1. Set the fan on a dry, level surface.
Step 2. Please make sure the speed knob is in the position 0. Plug the cord into
any standard AC outlet.
Step 3. The speed is adjusted by moving the knob left or right to the desired
setting. You can vary the speed between 1 (low), 2 (medium) and 3 (high).
TILT ADJUSTEMENT
To change the tilting angle of the fan head move the fan head to the desired
angle.
ILLUSTRATION
A)
Speed control knob
B)
Blade
C)
Grill
D)
Thumb bolts
E)
Bar with wheels
FAN STORAGE
The fan can be stored for the rest of the year fully assembled. It is
important that the place where you store is a safe, dry place. It is
recommended that the original box is used, or at least a box with the
appropriate dimensions.
CLEANING AND MAINTENANCE
Follow these instructions to correctly and safely care for you power fan. Please remember:
•
Always unplug the fan before cleaning of disassembling.
•
This machine only needs common external cleaning and wiping.
•
Do not allow water to drip on or into the fan motor housing.
•
Do not use any of the following as a cleaner gasoline, thinner or benzene.
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose
of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of
their old appliance.
DECLARATION OF CONFORMITY:
This device complies with the requirements of the Low Voltage Directive 2006/95/EC and the requirements
of the EMC directive 2004/108/EC.
