TECHNICAL MANUAL
BLUE PAPER OCCAM CARBON & HYDRO 2020
18 | ORBEA
ORBEA | 19
PRELOAD TOOL KIT OCCAM 20
CARBON: YES | HYDRO: YES
KIT Nº: Y0000141
QUANTITY
PRELOAD TOOL OCCAM 20
1
PRELOAD TOOL WASHER OCCAM 20
1
Serie 200
Serie 600
638
5
15 Nm
Montar la bieleta opuesta en el eje
With the frame bearings already installed on the frame,
install the linkage pre-assembly into the frame.
638
Linkage axle and arm pre-assembly with bearings and bolt.
Apply threadlock on the free end of the axle.
M6x20 Allen bolt
01
03
02
04
05
06
Linkage arm
Occam 2020 linkage axle
The linkage pre-assembly
must be done on the
non-threaded end of the
axle.
Install the right
linkage arm onto
the axle.
Screw the preload into
the axle and turn to it to
preload the assembly.
Apply
threadlock
on the axle´s
end before
installing
it into the
linkage arm.
2. Remove the preload tool.
1. Tighten the M6x20 Allen bolt.
LINKAGE ASSEMBLY
5
15 Nm
