DROPPER OC2
16 | ORBEA
TECHNICAL MANUAL
OC | 17
EN
Install the rubber bottom out bumpers onto the cartridge
shaft.
Check the correct operation of the OC2 Drpper. Install the saddle clamp assenmbly, the saddle and the seatpost on the
bike.
The hydraulic cartridge, the lower tube and the upper tube
of the OC2 Dropper have specific lenghts for each sea-
tpost size (drop). Order the correct kit for your seatpost.
Do not mix components from different lenght kits.
SERVICE KITS
8
9.2
10
9.1
9.3
Slide the lower tube upwards and screw the actuator as-
sembly.
To avoid crossthreading the shaft, first screw a couple of
turns the actuator assembly onto the shaft, then slide the
outer tube downwards and screw the actuator assembly
into the lower tube.
Tighten the actuator assembly to 5Nm using a 10mm allen
wrench.
31.6MM SEATPOSTS MEASUREMENTS
DROP (D)
LENGHT
L
L1
L2
L3
L4
L5
50mm
288mm
108mm
180mm
150mm
138mm
170mm
75mm
313mm
133mm
180mm
175mm
163mm
170mm
10mm
363mm
148mm
215mm
200mm
188mm
195mm
125mm
413mm
183mm
230mm
225mm
213mm
220mm
150mm
463mm
208mm
255mm
250mm
238mm
245mm
170mm
503mm
228mm
275mm
270mm
258mm
265mm
27.2MM SEATPOSTS MEASUREMENTS
DROP (D)
LENGHT
L
L1
L2
L3
L4
L5
80mm
404,5mm
140,5mm
264mm
255mm
179mm
255mm
L1
L2
D
L
