Orban OPTIMOD-FM 8600, Operating Manual

Page: 181 / 397

OPTIMOD-FM DIGITAL OPERATION
3-1
Section 3
Operation
8600 Front Panel
Headphone Jack allows you to monitor the output of the processing through
headphones. The headphones carry the same output as the rear-panel analog out-
put: either analog-channel processing, HD processing, or low-delay monitor pro-
cessing. Headphone impedance should be 75
Ω
or higher.
Headphone Level Control
(the blue control knob to the right of the jack) adjusts
headphone volume.
The red Enter button allows you to choose pop-up menu items, icons, and buttons.
If you are in the Preset screen, it allows you to put a Factory or User Preset on-air
once you have selected it.
If you edit a Factory Preset, you must save it as a new User Preset to retain your edit.
The green joystick, labeled
Locate
, is a pointing device that allows you to navigate
to settings and controls on each screen. If multiple screens are available, pressing
and holding the knob left or right moves you to the previous and next function
screens.
The yellow Escape button allows you to navigate quickly to underlying screens,
higher-level screens or the Meters screen, or displays the pop-up menu.
When a pop-up item, like Menu, is onscreen,
E
SCAPE
always returns you to the un-
derlying screen.
Pressing
E
SCAPE
from a secondary screen page, like System Setup > Place / Date /
Time 1 takes you back to the top level; in this case, the System Setup screen.
E
SCAPE
from top-level screens (like the System Setup screen), brings you back to the
Meters screen. If you are already in the Meters screen,
E
SCAPE
displays the pop-up
Menu.
The
Control Knob
is the large blue knob on the front panel. Turning the knob
scrolls through displayed lists (like the Preset screen list) or changes a setting that is
highlighted onscreen (e.g., the setting last selected by the
L
OCATE
joystick). Pushing
the knob in (towards the front panel) displays the pop-up Menu over the previous
screen.