Orban OPTIMOD-FM 8600, Operating Manual

Page: 110 / 397

2-50
INSTALLATION ORBAN MODEL 8600
Stop bits ..................... 1
Flow control............... none
G) Choose OK.
H) Navigate to File / Properties / Settings / ASCII Setup. Set the ASCII Setup prop-
erties as follows:
Check: •
Send line ends with line feeds
•
Echo typed characters locally
•
Wrap lines that exceed terminal width
Uncheck: •
Append line feeds to incoming line ends
•
Force incoming data to 7 bit ASCII
Leave “Line delay” and “Character delay” at their default values.
I) Activate the
C
APS
L
OCK
on your computer to ensure that you type in upper-
case.
You can now type in commands described in the specification in Adminis-
trative Operations Available via Serial Port #2 below.
Administrative Operations Available via Serial Port #2
In the following tables of commands and responses:
•
Text that the user enters appears in
MONOSPACED BOLD
.
•
Responses that the 8600 transmits appear in
monospaced normal
.
•
The symbol “  ” means CR (for received commands) and CR+LF (for transmitted
responses from 8600).
1. To restore factory defaults:
Command Response
RESTORE FACTORY DEFAULTS

Are you sure (yes / no)?

YES

(factory defaults restored)
Restored

NO

(or any response other than
YES
 ”)
(abort)
Defaults not restored

To protect against accidental loss of settings, you must enter the entire command
string and a “YES” response in uppercase.
Restoring factory defaults does the following:
I
•
Deletes all User Presets
•
Resets all global parameters to factory default settings
•
Deletes all Automation Events
•
Restores Remote Interface inputs 1-8 to “no function”
•
Clears all passcodes