17
EN
5
Remove the filter and clean it first by tapping it, then with a lukewarm shower
from the inside as shown and dry it in the air.
6
After thoroughly drying the filter, replace it on the bottom of the top assembly
and replace the entire assembly on the container.
Then secure the clips.
Warning!
If the filter is very dirty, replace it with a new one. (Check with your dealer.)
Warning!
Never insert a wet filter into the vacuum cleaner as this may damage the vacuum
cleaner or cause an electric shock.
Cleaning the suction opening
If there is an object clogging the suction opening of the vacuum cleaner, proceed
as follows:
1
Pull out the hose.
2
Remove the sucked obstruction from the suction port.
3
Attach the hose.
Cleaning and maintenance
• Never wash the engine top assembly under running water or immerse it in
water.
• Clean the equipment and accessories with a soft cloth. Do not use solvents or
abrasive cleaners for cleaning.
• The device must remain completely dry after cleaning.
NIE!
Štetec/
Kefka
