20
EN
Cleaning and maintenance
• Disconnect the power cord from the power supply.
Never immerse the appliance under running water or immerse it in
water.
• Clean the device and accessories with a soft cloth.
Do not use solvents or harsh detergents for cleaning.
• After cleaning, the device must remain completely dry.
Thermal engine fuse
The device is equipped with a thermal fuse before overloading and before
overheating. Such a situation can occur in the case of locking of the
opening or nozzles. If the device switches itself off in the middle, turn it off
and wait at least 45 minutes for the engine to cool down.
Then remove any possible cause of the hole or nozzle blockage, empty
the dispenser and clean the filter. After the engine has cooled down, turn
it on again. If the device still does not work properly, contact a service
center.
